Living Room

• Very good resistance to UV exposure
• Very good resistance to weathering
• Non-sag
• Very good adhesion to many construction materials
• Very good resistance to mold growth
• Very good elasticity and flexibility (movement capability ±25 %)
• Temperature resistance from -40 °C to +150 °C
• Non-corrosive
• Very low VOC emissions
• Very low odour

• Movement capability of ± 25 %
• Easy to apply and non-sagging
• Bonds well to most construction materials
• Good mechanical and weathering resistance
• Very low monomer content
• No training on the safe use of diisocyanates (REACH) required
• Adhesive-sealant with CE marking

 

• 1-component, ready to use.
• 100% solvent and water free, odourless.
• Will not cause warpage or curl of wood blocks or planks.
• Excellent workability
• Elastic, footfall sound-dampening.
• Suitable for all common types of wood floors.
• Reduces stress on the substrate and also reduces stress transfer between the wood floor and the substrate.
• Suitable for use with under floor heating.
• Can be sanded.

• 1-part, ready to use
• High strength rigid bond
• Very good spreadability
• Excellent adhesion to all types of wood
• Adhesive can be sanded

• Incredible initial grab. Double that of most common grab adhesives.
• High ultimate bonding strength.
• Interior and exterior use.
• Can be applied to damp/wet surfaces.
• Totally waterproof & weatherproof.
• Quick curing.
• Overpaintable if required.
• Solvent free formula.
• Resistant to temperature extremes -40°C to +80°C.
• Permanently flexible.
• Resistant to chemicals & petrol (10% dilute acids/alkalis, most solvents).
• Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.                                                                                                                                                                                                                                    Modulous @ 100% elongation Ca. 1.3 MPa Shrinkage (ISO 10563) < 4% Compatibility With Paints Water based: yes (test compatibility) Solvent based: no (with alkyd paints)

• Rapid setting (30 minutes, depending on ambient temperature and conditions).
• Easy mixing, just add water.
• Fills up to 25mm in one application (for deeper holes in excess of 25mm use Jetcem Premix sand/cement)

• Dries in 1 hour.
• Easy mixing, just add water.
• Adheres to most common building surfaces.
• Overpaintable.
• Doesn't shrink or crack.

• Solvent based formula - quick drying / high early bond strength.
• Excellent adhesion/bond strength - adheres to most common surfaces.
• Good early grab properties - usable both horizontally and vertically
• High solids formulation - excellent gap filling properties.
• Suitable for use where both surfaces are non-porous.
• Excellent external weathering properties - suitable for exterior use
• Excellent chemical resistance

Viscosity 1,800,000 cP Ash rate 50 +/- 1% VOC 30 +/- 1% Flash point -10°C

• Can be painted with most waterborne paints
• Very good resistance to UV exposure
• Good adhesion to many construction materials
• Easy to apply, tool and clean
• Low stress on substrate due to plastic behaviour of the sealant
• Very low VOC emissions
• Free of solvents and phthalates (acc. TRGS 610)
• Transportable at −10 °C (max. 24 hours)

• Can be painted with most waterborne paints
• Easy to apply, tool and clean
• Low stress on substrate due to plastic behaviour of the sealant
• Very low VOC emissions
• Good adhesion to many construction materials
• Transportable at −10 °C (max. 24 hours)

• Movement capability of ± 25 %
• Easy to apply and non-sagging
• Bonds well to most construction materials
• Good mechanical and weathering resistance
• Very low monomer content
• No training on the safe use of diisocyanates (REACH) required
• Adhesive-sealant with CE marking

 

• Movement capability of ± 25 %
• Easy to apply and non-sagging
• Bonds well to most construction materials
• Good mechanical and weathering resistance
• Very low monomer content
• No training on the safe use of diisocyanates (REACH) required
• Adhesive-sealant with CE marking

 

• Very good resistance to UV exposure
• Very good resistance to weathering
• Non-sag
• Very good adhesion to many construction materials
• Very good resistance to mold growth
• Very good elasticity and flexibility (movement capability ±25 %)
• Temperature resistance from -40 °C to +150 °C
• Non-corrosive
• Very low VOC emissions
• Very low odour